Subway Tile Kitchen Backsplash in Loomis
This Loomis kitchen received a full backsplash installation using classic 3x6-inch white ceramic subway tile in a running bond pattern. The wall surface ran from the countertop to the underside of the upper cabinets, with a section above the range that extended to the range hood. The layout required careful centering on the range wall so the pattern would be symmetrical behind the hood — a detail that is easy to overlook but immediately visible once the cabinets are in place.
Six electrical outlets were cut into the field tile using a diamond hole saw, which keeps the boxes flush and avoids the awkward look of tile cut around a protruding box. The grout selected was a dark charcoal — a contrast choice that makes the tile grid visible and gives the backsplash a more graphic, defined character than a tone-on-tone grout would.
What we did
Cleaned and primed the drywall surface; confirmed the countertop was level to use as a reference line.
Centered the layout on the range wall and established reference lines for the full backsplash area.
Set tile with non-sag white thinset; cut outlets using diamond hole saw to keep boxes flush.
Grouted with charcoal sanded grout; cleaned tile face and applied silicone at countertop joint.
Considering a kitchen backsplash in Loomis? Send us a message to schedule a walkthrough.