Serving Loomis, Penryn & Rocklin — Placer County (916) 313-2587

Calacatta Shower Remodel in Loomis

Walk-in shower fully tiled in Calacatta marble-look porcelain with mosaic accents

This walk-in shower remodel replaced an aging fiberglass surround in a Loomis ranch home with full Calacatta marble-look porcelain tile from floor to ceiling. The existing surround was removed, the framing was inspected, and a sheet-applied waterproofing membrane was installed over cement board before any tile was set. The wall tile runs in a large-format vertical stack, and a small mosaic accent panel was incorporated at eye level on the back wall — a detail the homeowner chose to break up the expanse of the larger field tile.

The shower floor uses a smaller mosaic format to achieve the required slope toward the drain while maintaining a slip-resistant surface. Grout joints throughout are a tight 1/16 inch, which required consistent back-buttering on every field tile to maintain the full coverage needed for a wet-area installation in a Loomis home that sees temperature swings year-round.

ServiceBathroom Tile Installation
AreaLoomis, CA
MaterialsCalacatta marble-look porcelain (large format), small mosaic accent tile
ScopeResidential — master bathroom shower
TimelineMulti-day install

What we did

1

Removed existing fiberglass surround and inspected framing and subfloor for moisture damage.

2

Installed cement board and sheet-applied waterproofing membrane with fabric-reinforced corners and seams.

3

Set field tile with back-buttering and polymer-modified thinset, maintaining 1/16-inch joints throughout.

4

Grouted, cleaned, and applied silicone at all plane changes and the perimeter curb joint.

For a similar shower remodel in Loomis or nearby, contact us to schedule a free walkthrough.

Thank you — we received your request. We'll get back to you within 1 business day.