Gray Marble Master Bath in Loomis
This master bathroom in a Loomis home received a full floor tile installation using large-format gray marble-look porcelain. The tile runs across the main floor area and wraps into the tub deck, creating a continuous surface that reads as a single material throughout the space. The freestanding soaking tub sits directly on the tile, which required careful layout planning to ensure the tub feet land on solid tile rather than on a grout joint.
The floor was a concrete slab, which was assessed for moisture vapor before installation. A 1/8-inch skim coat was applied to level a low area near the vanity before the tile was set. Large-format porcelain at this scale requires back-buttering on every piece — a step that adds time but ensures the coverage needed to prevent hollow spots under the tile surface.
What we did
Assessed slab for moisture vapor and levelness; applied skim coat to correct a low area near the vanity wall.
Dry-laid the tile to plan freestanding tub foot placement and minimize visible cuts at room entry.
Set tile with back-buttering and large-format thinset, maintaining consistent 1/8-inch joints.
Grouted with a light gray grout and applied silicone at the tub deck perimeter and wall transitions.
Interested in a similar floor tile project in Loomis? Request a free walkthrough.