Serving Loomis, Penryn & Rocklin — Placer County (916) 313-2587

Calacatta Living Room Floor in Rocklin

Large-format Calacatta marble porcelain tiles being installed on a living room floor

This Rocklin living room received a large-format Calacatta marble-look porcelain floor installation as part of a full interior renovation. The tile is 24 by 24 inches, set in a simple grid pattern with a 1/8-inch joint — a layout that maximizes the visual impact of the tile's veining by keeping the pattern continuous and uninterrupted. The spacers visible in the photo are tile leveling clips, used to keep adjacent tiles in plane during installation and prevent lippage on the large-format surface.

The sliding glass door threshold required careful planning: the tile needed to finish flush with the door track on the interior side while allowing the door to operate freely. We coordinated the finish height with the door installer before setting the first tile so the threshold detail would be clean rather than improvised after the fact. The slab was confirmed level across the full room before installation began.

ServiceFloor Tile Installation
AreaRocklin, CA
Materials24x24 Calacatta marble-look polished porcelain, tile leveling system
ScopeResidential — living room floor
TimelineMulti-day install

What we did

1

Confirmed slab level and moisture; coordinated finish height with door installer before setting tile.

2

Established grid layout from room center; dry-laid to confirm perimeter cuts and door threshold detail.

3

Set tile with back-buttering and leveling clips to eliminate lippage across the large-format surface.

4

Grouted with light gray unsanded grout at 1/8-inch joints; installed door threshold profile at sliding door.

Planning a large-format floor in Rocklin? Reach out to schedule a walkthrough.

Thank you — we received your request. We'll get back to you within 1 business day.