Calacatta Shower Build in Penryn
This project was a new shower construction in a Penryn farmhouse undergoing a full bathroom renovation. The framing was already complete when we arrived, and our scope began with cement board installation and waterproofing before any tile was touched. The tile selected was a large-format Calacatta marble-look porcelain — a material that requires precise back-buttering and a large-notch trowel to achieve the full coverage needed on a wall application of this scale.
The yellow tile spacers visible in the photo are leveling clips, part of a tile leveling system that keeps adjacent tiles in plane during installation. On large-format porcelain, lippage — where one tile edge sits higher than its neighbor — is a common failure point. The leveling system eliminates that risk by mechanically holding tiles in plane until the thinset cures. It is a step that adds time to the installation but produces a noticeably flatter finished surface.
What we did
Installed cement board over wood framing and applied sheet waterproofing membrane with reinforced corners.
Back-buttered each large-format tile and set with tile leveling clips to eliminate lippage.
Removed leveling clips after thinset cure; confirmed all tiles were in plane before grouting.
Grouted with light gray grout; siliconed all plane transitions and the perimeter curb joint.
Planning a new shower build in Penryn? Contact us for a free walkthrough.